One basement contractor in Park Hill is not the same as another. Make sure that you protect yourself from scams and potential problems by finding a basement contractor with an excellent reputation and quality products.
Reliable Basement Contractors
The best way to find out about great basement finishing and waterproofing contractors in your area is to ask your family, neighbors and coworkers. You’re likely to be surprised by how many have had work done! Gather the names of as many honest basement specialists in the area that you can find.
Once you’ve developed a list, look into their professional reputation. Most importantly, make sure that they have an established business, as 50% of contractors will fail within the first five years. An established company will be there if you need them. Be sure to also check with the Better Business Bureau to make sure they have a reputation of satisfied customers. A good home renovation contractor will also happily provide you with references from recent jobs- follow up your research by calling them.
The Right Contractor for You
If you prepare yourself properly, a basement contractor can help you with your basement finishing and waterproofing that will add a great deal of value and usable space to your home. But if you decide to go ahead, make sure that you’ve covered all bases and done your research.
What are the Best Tips for Hiring a Reputable Home Remodeling Contractor or a Basement Finishing Contractor in Park Hill?
This article is written for those who want to find a kitchen remodeling contractor immediately - after reading. If you fall within this category then take some time to read weight through to the end before you hire any contractor.
Before you settle down with one contractor compare their years in business. You need to choose one that has been around for longer. I usually say a contractor that is more than 5 years in business is better than most. However, it is not always about the time but about the number and magnitude of jobs done. Do take that into consideration as you compare them.
The price is one of the most important factors to compare kitchen remodeling companies with. After contacting them, each one of them should come to your place for an inspection - this is why I say at this stage you need to shortlist them to at least 3 so you don't have too many people coming in to your home. Find the best quotation and hire your best contractor.
Basement Finishing Ideas That Are Fun for the Whole Family
Basement finishing sometimes requires putting up a stud wall. Tailing up the studs that will form the structural support for the new walls of your remodeling job is a highly satisfactory task. It will be accomplished quickly.
The next task when basement finishing with a stud wall is to measure along an existing wall to the point where the new partition will connect. Drive a nail into the floor at this spot. Tie one end of a chalk line onto the nail. What's a chalk line? It's a length of tough builder's twine that's been rubbed across a big lump of carpenter's chalk. If you want to get fancy, you can buy the same deal on a little reel affair that is filled with chalk dust. In either form the gadget is a very handy marking device.
Reel off enough chalk line to take you out to the end of your new partition wall. At this point, you really need an assistant to hold the line taut; sometimes basement finishing requires more than two hands. Place a large carpenter's square so that one leg lines up with the old wall and the corner of the square rests up against the nail that you've just driven into the floor. Jockey your line back and forth until it is aligned perfectly with the other leg of the square. Stretch it taut, pull it up at the center and let it snap down to make a neat chalk line along the floor.
Select a nice straight 2x4. It should be long enough to reach from floor to ceiling minus about 1 in. Sight along the side of the timber to make sure that it's straight because this piece of wood is a measuring stick of sorts. Here's how to use it for your basement finishing task.
Rest the bottom end of your measuring stick against the side of the shoe. Hold it in place with your foot. The top edge of this timber rests against the side of the plate and you hold it there with your hand. With your other hand, hold a level flat against the side of the measuring stick.
Jockey the whole works back and forth until the bubble in the level is centered, then nail the loose end of the plate to the ceiling. If you've been lucky enough to locate an absolutely straight stud as a measuring stick, mark it carefully and put it aside so that you can use it for the same job later on. That'll make your basement finishing easier.
You should end up with a satisfactory stud wall.