Basic Basement Finishing Derby

One basement contractor in Derby is not the same as another. Make sure that you protect yourself from scams and potential problems by finding a basement contractor with an excellent reputation and quality products.

Reliable Basement Contractors

The best way to find out about great basement finishing and waterproofing contractors in your area is to ask your family, neighbors and coworkers. You’re likely to be surprised by how many have had work done! Gather the names of as many honest basement specialists in the area that you can find.

basement finishing steps

Once you’ve developed a list, look into their professional reputation. Most importantly, make sure that they have an established business, as 50% of contractors will fail within the first five years. An established company will be there if you need them. Be sure to also check with the Better Business Bureau to make sure they have a reputation of satisfied customers. A good home renovation contractor will also happily provide you with references from recent jobs- follow up your research by calling them.

The Right Contractor for You

If you prepare yourself properly, a basement contractor┬ácan help you with your basement finishing and waterproofing that will add a great deal of value and usable space to your home. But if you decide to go ahead, make sure that you’ve covered all bases and done your research.

What are the Best Tips for Hiring a Reputable Home Remodeling Contractor or a Basement Finishing Contractor in Derby?

steps to finishing a basement

Basement finishing sometimes requires putting up a stud wall. Tailing up the studs that will form the structural support for the new walls of your remodeling job is a highly satisfactory task. It will be accomplished quickly.

The next task when basement finishing with a stud wall is to measure along an existing wall to the point where the new partition will connect. Drive a nail into the floor at this spot. Tie one end of a chalk line onto the nail. What's a chalk line? It's a length of tough builder's twine that's been rubbed across a big lump of carpenter's chalk. If you want to get fancy, you can buy the same deal on a little reel affair that is filled with chalk dust. In either form the gadget is a very handy marking device.

Reel off enough chalk line to take you out to the end of your new partition wall. At this point, you really need an assistant to hold the line taut; sometimes basement finishing requires more than two hands. Place a large carpenter's square so that one leg lines up with the old wall and the corner of the square rests up against the nail that you've just driven into the floor. Jockey your line back and forth until it is aligned perfectly with the other leg of the square. Stretch it taut, pull it up at the center and let it snap down to make a neat chalk line along the floor.

Select a nice straight 2x4. It should be long enough to reach from floor to ceiling minus about 1 in. Sight along the side of the timber to make sure that it's straight because this piece of wood is a measuring stick of sorts. Here's how to use it for your basement finishing task.

Rest the bottom end of your measuring stick against the side of the shoe. Hold it in place with your foot. The top edge of this timber rests against the side of the plate and you hold it there with your hand. With your other hand, hold a level flat against the side of the measuring stick.

Jockey the whole works back and forth until the bubble in the level is centered, then nail the loose end of the plate to the ceiling. If you've been lucky enough to locate an absolutely straight stud as a measuring stick, mark it carefully and put it aside so that you can use it for the same job later on. That'll make your basement finishing easier.

You should end up with a satisfactory stud wall.

Basement Contractors - Choosing the Best One for You

framing unfinished basement

As part of your basement finishing project you may have to deal with mold. Basements tend to be the perfect hangout for this type of fungus so you may have to eliminate this prior to beginning your basement finishing project. It is often the case that basements are full of junk, and it is only when you remove everything to begin remodeling that they realize they have a mold problem. This might come as a shock, but don't get too hung up about it because it is far better dealing with mold now than having to deal with it when you have completed the renovation project.

When removing the mold from the basement you will need to be cautious. Some mold is toxic and even non-toxic mold can cause health problems. If you are pregnant then don't go anywhere near it because there is a suspected link between certain types of mold and miscarriage. The best advice would be to treat all mold suspiciously and wear protective eye glasses and a respiratory mask. This is because while cleaning you could make mold spores airborne, and these could end up in your lungs or eyes.

The next thing you will need to do is determine what caused the mold in the first place otherwise you will have to deal with it again and could even make it worse by your basement finishing. Mold is caused by poor ventilation or leaks causing dampness in your basement. So you will need to establish what the cause of dampness is and eliminate it. A good place to start will be where you have just removed the mold. When you are working on your renovation make sure that you constantly keep in mind issues surrounding mold, and don't do anything that will create a good habitat for it in the future.

basement lighting

Walkout Basement Construction Denver