One basement contractor in Henderson is not the same as another. Make sure that you protect yourself from scams and potential problems by finding a basement contractor with an excellent reputation and quality products.
Reliable Basement Contractors
The best way to find out about great basement finishing and waterproofing contractors in your area is to ask your family, neighbors and coworkers. You’re likely to be surprised by how many have had work done! Gather the names of as many honest basement specialists in the area that you can find.
Once you’ve developed a list, look into their professional reputation. Most importantly, make sure that they have an established business, as 50% of contractors will fail within the first five years. An established company will be there if you need them. Be sure to also check with the Better Business Bureau to make sure they have a reputation of satisfied customers. A good home renovation contractor will also happily provide you with references from recent jobs- follow up your research by calling them.
The Right Contractor for You
If you prepare yourself properly, a basement contractor can help you with your basement finishing and waterproofing that will add a great deal of value and usable space to your home. But if you decide to go ahead, make sure that you’ve covered all bases and done your research.
What are the Best Tips for Hiring a Reputable Home Remodeling Contractor or a Basement Finishing Contractor in Henderson?
Some people think that basement finishing is expensive and time consuming, but it doesn't have to be. It can be very enjoyable depending on your taste and if you don't mind making it your weekend projects for awhile. By finishing your basement you are adding more space to your home and there are so many options that you can choose from such as having a home theater, a game room, a wet bar, an extra bedroom and the list goes on you can make it to suit exactly what you need.
You will find that doing a basement is not really expensive as there are no outer walls to build. All you have to do is finish the inside and the best part is you can take your time building it as it is not a crucial part of your living quarters. You can do this work yourself and if you're not sure of what you are doing you will find all kinds of advice as close as the internet.
Before you start you should have your plans in place as to what you're going to do with your basement. This means considering the state of your basement and what type of living space you have in mind. You may find that you will have to move some things such as water heaters, furnace or oil storage tanks or maybe your design can fit around these things. This is also the time to check your basement walls for any leaks that you may have. This is very important for the future use of your basement. It would probably be a good idea to seal all of your walls before you start building finishing your basement just to be on the safe side. It could save you a lot of problems in the future. You don't want to put all this work into your basement and find out you have a leak later.
Basement Finishing and Dealing With Mold
Basement finishing sometimes requires putting up a stud wall. Tailing up the studs that will form the structural support for the new walls of your remodeling job is a highly satisfactory task. It will be accomplished quickly.
The next task when basement finishing with a stud wall is to measure along an existing wall to the point where the new partition will connect. Drive a nail into the floor at this spot. Tie one end of a chalk line onto the nail. What's a chalk line? It's a length of tough builder's twine that's been rubbed across a big lump of carpenter's chalk. If you want to get fancy, you can buy the same deal on a little reel affair that is filled with chalk dust. In either form the gadget is a very handy marking device.
Reel off enough chalk line to take you out to the end of your new partition wall. At this point, you really need an assistant to hold the line taut; sometimes basement finishing requires more than two hands. Place a large carpenter's square so that one leg lines up with the old wall and the corner of the square rests up against the nail that you've just driven into the floor. Jockey your line back and forth until it is aligned perfectly with the other leg of the square. Stretch it taut, pull it up at the center and let it snap down to make a neat chalk line along the floor.
Select a nice straight 2x4. It should be long enough to reach from floor to ceiling minus about 1 in. Sight along the side of the timber to make sure that it's straight because this piece of wood is a measuring stick of sorts. Here's how to use it for your basement finishing task.
Rest the bottom end of your measuring stick against the side of the shoe. Hold it in place with your foot. The top edge of this timber rests against the side of the plate and you hold it there with your hand. With your other hand, hold a level flat against the side of the measuring stick.
Jockey the whole works back and forth until the bubble in the level is centered, then nail the loose end of the plate to the ceiling. If you've been lucky enough to locate an absolutely straight stud as a measuring stick, mark it carefully and put it aside so that you can use it for the same job later on. That'll make your basement finishing easier.
You should end up with a satisfactory stud wall.