One basement contractor in Stonegate is not the same as another. Make sure that you protect yourself from scams and potential problems by finding a basement contractor with an excellent reputation and quality products.
Reliable Basement Contractors
The best way to find out about great basement finishing and waterproofing contractors in your area is to ask your family, neighbors and coworkers. You’re likely to be surprised by how many have had work done! Gather the names of as many honest basement specialists in the area that you can find.
Once you’ve developed a list, look into their professional reputation. Most importantly, make sure that they have an established business, as 50% of contractors will fail within the first five years. An established company will be there if you need them. Be sure to also check with the Better Business Bureau to make sure they have a reputation of satisfied customers. A good home renovation contractor will also happily provide you with references from recent jobs- follow up your research by calling them.
The Right Contractor for You
If you prepare yourself properly, a basement contractor can help you with your basement finishing and waterproofing that will add a great deal of value and usable space to your home. But if you decide to go ahead, make sure that you’ve covered all bases and done your research.
What are the Best Tips for Hiring a Reputable Home Remodeling Contractor or a Basement Finishing Contractor in Stonegate?
Basement finishing sometimes requires putting up a stud wall. Tailing up the studs that will form the structural support for the new walls of your remodeling job is a highly satisfactory task. It will be accomplished quickly.
The next task when basement finishing with a stud wall is to measure along an existing wall to the point where the new partition will connect. Drive a nail into the floor at this spot. Tie one end of a chalk line onto the nail. What's a chalk line? It's a length of tough builder's twine that's been rubbed across a big lump of carpenter's chalk. If you want to get fancy, you can buy the same deal on a little reel affair that is filled with chalk dust. In either form the gadget is a very handy marking device.
Reel off enough chalk line to take you out to the end of your new partition wall. At this point, you really need an assistant to hold the line taut; sometimes basement finishing requires more than two hands. Place a large carpenter's square so that one leg lines up with the old wall and the corner of the square rests up against the nail that you've just driven into the floor. Jockey your line back and forth until it is aligned perfectly with the other leg of the square. Stretch it taut, pull it up at the center and let it snap down to make a neat chalk line along the floor.
Select a nice straight 2x4. It should be long enough to reach from floor to ceiling minus about 1 in. Sight along the side of the timber to make sure that it's straight because this piece of wood is a measuring stick of sorts. Here's how to use it for your basement finishing task.
Rest the bottom end of your measuring stick against the side of the shoe. Hold it in place with your foot. The top edge of this timber rests against the side of the plate and you hold it there with your hand. With your other hand, hold a level flat against the side of the measuring stick.
Jockey the whole works back and forth until the bubble in the level is centered, then nail the loose end of the plate to the ceiling. If you've been lucky enough to locate an absolutely straight stud as a measuring stick, mark it carefully and put it aside so that you can use it for the same job later on. That'll make your basement finishing easier.
You should end up with a satisfactory stud wall.
Choosing the Best Basement Contractors
Probably one of the most asked questions by homeowners who have just purchased a new home with a basement is how to finish their basement. Most new homeowners become very overzealous to this fact that they want to take on a do-it-yourself job and the easiest way to go about that is to start in a place that is not as visible to everyone or a very high-traffic area. The basement becomes a natural choice and the homeowner will get very excited with the idea of a finished basement. Soon they will rush out and start gathering all the supplies needed to do the job and not take into account some very basic factors to ensure a properly finished basement with just the right look and feel.
Typically the first thing a new homeowner with a new basement would assume is that it is a new home and doesn't have any problems or leaks as it was just built. While that is probably true that there are no leaks at this time, what is not being factored into the equation here is that for the most part the house has not had the proper time to really settle and concrete is a very wet material. There is no substitute for time and it takes concrete quite a while to dry out from the mixture that laid the foundation. Yes the concrete is strong enough to build the house on but there is still a lot of moisture trapped within the concrete itself. There is nothing that you can do to speed up that process of concrete drying due to it's very porous nature and that it just holds water. Give the slab some time to acclimate and wait six months to a year before you attempt to finish the basement or install basement flooring. After that time has passed check it and see if the concrete is still holding moisture or not. There are plenty of simple and cheap tests that can be run to accomplish a moisture test.
Be sure to also check with your local building codes as well as there may be some things that are inappropriate to use while finishing a basement. As an example, if you are going to install a door and are putting together a bottom sill, it may be inappropriate to utilize pressure treated lumber instead of standard lumber to do the job as long as there is a sill gasket in place. The sill gasket will separate the wood from the concrete where moisture will typically accumulate. You might also be required to use certain gauge dry wall screws when applying the wall to the studs. You never know and every local code is different so it's best to check with them first to make sure all your ducks are in a row. Often times so much of this information is contradictory and in abundance, so to avoid the confusion check with your local building code first and then come back to research more on how to finish a basement.