One basement contractor in U.S. Air Force Academy is not the same as another. Make sure that you protect yourself from scams and potential problems by finding a basement contractor with an excellent reputation and quality products.
Reliable Basement Contractors
The best way to find out about great basement finishing and waterproofing contractors in your area is to ask your family, neighbors and coworkers. You’re likely to be surprised by how many have had work done! Gather the names of as many honest basement specialists in the area that you can find.
Once you’ve developed a list, look into their professional reputation. Most importantly, make sure that they have an established business, as 50% of contractors will fail within the first five years. An established company will be there if you need them. Be sure to also check with the Better Business Bureau to make sure they have a reputation of satisfied customers. A good home renovation contractor will also happily provide you with references from recent jobs- follow up your research by calling them.
The Right Contractor for You
If you prepare yourself properly, a basement contractor can help you with your basement finishing and waterproofing that will add a great deal of value and usable space to your home. But if you decide to go ahead, make sure that you’ve covered all bases and done your research.
What are the Best Tips for Hiring a Reputable Home Remodeling Contractor or a Basement Finishing Contractor in U.S. Air Force Academy?
Basement finishing sometimes requires putting up a stud wall. Tailing up the studs that will form the structural support for the new walls of your remodeling job is a highly satisfactory task. It will be accomplished quickly.
The next task when basement finishing with a stud wall is to measure along an existing wall to the point where the new partition will connect. Drive a nail into the floor at this spot. Tie one end of a chalk line onto the nail. What's a chalk line? It's a length of tough builder's twine that's been rubbed across a big lump of carpenter's chalk. If you want to get fancy, you can buy the same deal on a little reel affair that is filled with chalk dust. In either form the gadget is a very handy marking device.
Reel off enough chalk line to take you out to the end of your new partition wall. At this point, you really need an assistant to hold the line taut; sometimes basement finishing requires more than two hands. Place a large carpenter's square so that one leg lines up with the old wall and the corner of the square rests up against the nail that you've just driven into the floor. Jockey your line back and forth until it is aligned perfectly with the other leg of the square. Stretch it taut, pull it up at the center and let it snap down to make a neat chalk line along the floor.
Select a nice straight 2x4. It should be long enough to reach from floor to ceiling minus about 1 in. Sight along the side of the timber to make sure that it's straight because this piece of wood is a measuring stick of sorts. Here's how to use it for your basement finishing task.
Rest the bottom end of your measuring stick against the side of the shoe. Hold it in place with your foot. The top edge of this timber rests against the side of the plate and you hold it there with your hand. With your other hand, hold a level flat against the side of the measuring stick.
Jockey the whole works back and forth until the bubble in the level is centered, then nail the loose end of the plate to the ceiling. If you've been lucky enough to locate an absolutely straight stud as a measuring stick, mark it carefully and put it aside so that you can use it for the same job later on. That'll make your basement finishing easier.
You should end up with a satisfactory stud wall.
Planning a Remodeled Basement - A Survival Guide
When it comes to renovating a home, remodeling a condo or building a new cottage, you have to make one fundamental decision. Do you want to hire an architect and a general contractor separately or choose a single person to do all the jobs for you? It means you have to make a choice between the design-bid-build method and the design-build method.
The Difference between the Two!
The design-build is a delivery method that involves hiring one single entity for completing the construction work. It means you do not have to hire an architect for creating design plans and a contractor for fulfilling them. A single person delivers all the things that you require for a successful home renovation project.
On the other hand, design-bid-build, allows you to hire an expert for the design phase and another one for the construction phase. It ensures that you have the power of selecting a contractor that suits your requirements. Also, the constant competition between the architect and the contractor can lead to improved efficiency.
The design-build method is responsive. It means if you want to revisit a few decisions, you can ask the contractor to help you with it. If you opt for the conventional design-bid-build method, it will not allow you to make changes without the added cost.
When you are interested in undertaking a home renovation project on your property, the design-build method becomes a pragmatic choice. Search for a reliable and experienced design-build contractor who has a team of licensed architects working for him. Hire someone with professional experience in construction as well as pricing.